SHD Support - Frimware 1303, 1703, 2403, 3203, 703Bolt – SmallHD – Technical - Multi Screen Dual Input Viewing Wireless

1303, 1703, 2403, 3203, 703Bolt – SmallHD – Technical - Multi Screen Dual Input Viewing Wireless

PROBLEM

We are running the bolt which is connected to A-camera on a 3000 system and we have attached another bolt 1000 to the back of the monitor which is connected to B-camera and fed into the monitor via SDI. We can have the split screen on one page, A-camera feed on another page which is the wireless feed but we’re trying to have the SDI feed for B-camera on another page so we can flick between split screen, A and B. Is this doable, configuring different inputs to different pages?

SOLUTION

You have a few options to change views.  The specific way you are requesting is not easily accomplished but could be done with one of the following:

There is the ability to assign the function buttons to cycle inputs.  This will allow you to switch between SDI1, SDI@ and Wireless/HDMI inputs.  You can do it by pressing the input select button to cycle or using the joystick to select.

There is also the ability to assign the function buttons to a specific input.  This would allow you to change the input that in on screen by pressing a button (F4 for Cam A, F5 for Cam B etc). If you are wanting to apply different LUTS, this would need to be done on a separate page and then change the input to the desired camera at that time.  You can label the pages to help avoid confusion.

There is also the option for Multi Screen viewing, in which you can select two inputs on the same page.  Input 1 (primary) will always be on the Left but Input 2 can be changed.  Multi Screen Viewing is its own page, you can not have multiple Multi Screen Pages. Input 1(Primary) will be your main input on the other pages.  You can cycle the inputs on the Multi page as well.

Keywords

Multi cameras, wireless, change inputs, assign pages.

CASE:   180703