SHD Support - GH5s – Panasonic – Technical – Waveform maxes at 80 ire shooting in vLog

GH5s – Panasonic – Technical – Waveform maxes at 80 ire shooting in vLog

PROBLEM

The Waveform on my Focus maxes out at 80 IRE. I have looked at the manual and can't figure this out at all. The image on the screen of the gh5s is complete white blown out the monitor is reading 80. I am shooting in vLOG

SOLUTION

Shooting in vLog requires the application of a corrective lut to get the IRE factors to align correctly. This is done through the LUT tool on a page.

The LUT should be available in the internal folder- Panasonic vLog.  Apply the LUT and then apply the waveform.

In the Waveform settings, be sure that the “Ignore look” box is unchecked.

This should set the levels back normal.

Keywords

waveform, levels, colow, brightness, tools,

CASE:   180056