SHD Support - RX TX – SmallHD Teradek – Troubleshooting – Indoor Outdoor Wireless No HDMI

RX TX – SmallHD Teradek – Troubleshooting – Indoor Outdoor Wireless No HDMI

PROBLEM

There is an issue we wanted to report you. When we use Cine 7 500 TX, no video comes out with Cine 7 Sidekick RX, 703 Bolt or Bolt 500 RX. Cine 7 500 TX can be paired with all receivers but the monitor on the

receiver side shows "No video".

3.5.0 (Japan)

SOLUTION

There is a +1min delay for sync when switching/ using the Outdoor setting.  After pairing and switching from indoor to outdoor on both the TX and RX, allow for longer than one min for the video to lock.

There may also be a slight difference in the order of changing regions that could affect the video sync.  We recommend changing the TX before the RX in these cases.

When using indoor, the units usually take 10-15 seconds to sync/lock on the video signal.

Keywords

wireless, cine7, bolt, pairing, no video, syny, HDMI, BNC, Regions, region.

CASE:   SC184234