Receive lossless 4K video from up to 750/1500 ft line-of-sight with the Bolt 4K Monitor Module RX. The module mounts onto the back of a SmallHD Cine 7 or 702 Touch monitor and can wirelessly transmit up to 4K30 video with 10-bit 4:2:2 HDR support to any Bolt 4K transmitter.
The Bolt 4K Monitor Module TX features improved metadata, range, and compatibility over its predecessors, and includes built-in AES-256 encryption with RSA 1024 key pairing to protect your video.
CONNECT AND POWER
NOTE: Attaching a Monitor module to any wireless version of the Smart 7 monitor will automatically disable your monitor's internal wireless and instead use the module's wireless capabilities. To use the monitor's wireless capabilities, simply connect power to the monitor instead of the module, then navigate to the WIRELESS SETTINGS and enable WIRELESS.
- Remove the battery plate from the back of the Smart 7 monitor.
- Detach the cover plate from the back of the Bolt 4K Monitor Module to expose the JST connector.
NOTE: There is no need to disconnect the JST connector.
- Place the monitor module firmly against the back of the Smart 7 monitor. Ensure that the two top mounting holes, connector pins, and micro USB align with their corresponding terminals.
- Insert two M3 socket-head screws through the two top mounting holes on the monitor module and
into the back of the monitor. DO NOT OVER-TIGHTEN.
Optional: Attach a V-mount or Gold-mount battery plate to the monitor module, then tighten the four
Phillips screws. NOTE: Before attaching the battery plate to the monitor module, ensure the wires are tucked into the plate so that they do not obstruct the release button’s operation.
- Insert, then tighten the 1/4”-20 hex screw to secure the monitor module assembly against the back of
the monitor. DO NOT OVER-TIGHTEN.
- Attach a compatible battery to the battery plate (optional), or connect power to the module’s 6-18V
DC input using the included A/C adapter. NOTE: Ensure the A/C adapter is connected to the module
and NOT the monitor.
- Attach antennas to the monitor module via the threaded RP-SMA connectors (A), then connect an
HDMI cable from the module to the monitor.
- Turn the system on by pressing and holding down the monitor’s power button.
Use the Bolt App to remotely manage and monitor every parameter of the Bolt 4K Monitor Module RX including pairing, channel selection, and 3D LUTs.
CONNECT TO BOLT VIA BLUETOOTH
- Download the Bolt App.
- Enable Bluetooth on your iOS or Android device.
- Open the Bolt App and tap Status/Configuration.
- Select the device you want to monitor.
RECEIVER STATUS DISPLAY
Settings: Tap the settings button (3 dots) at the top of the screen to customize the transmitter’s various settings.
- Wireless Settings - View the current Region, adjust the Bandwidth, or enable Fixed Frequency Mode
- Pairing - View which devices are paired with the RX
- RX OSD Name - Change the name of the RX as it is displayed on OSD
- System Info - View the RX device info, firmware versions, perform firmware upgrades, or restart your device
- Device Registration - Register your device
Signal Quality: Determine the quality and reliability of the signal being received.
SNR (Signal to Noise Ratio): Compare the signal power level to the noise power level from the attached antennas.
Range (Quality/Range Analyzer): Displays the transmission distance
Status: Displays the name of the synced TX, Network Status, Link Status, Video Input, Current Frequency, Range, Quality, Temperature, Camera Recording, Bandwidth, Video and OSD Name.
Before use, your Bolt 4K Monitor Module RX needs to be paired with a Bolt 4K transmitter using SmallHD Smart 7’s user interface or the Bolt App. NOTE: Before starting either pairing process, ensure that the transmitter, receiver, and monitor have the latest firmware version and have Bluetooth enabled.
PAIRING VIA SMART 7 MONITOR
- Swipe right on the monitor’s touchscreen, then tap on the Full Settings option once it appears.
- Scroll back up and tap to select the TERADEK BOLT 4K option, then tap Pair new transmitter (TX).
- Enable Pairing on the Bolt 4K receiver by selecting Pair on the front panel menu. The module will
begin scanning for receivers to automatically pair with.
- Once the devices are paired successfully, tap Accept to dismiss the menu. If pairing fails, try again.
PAIRING VIA BOLT APP
- Open the Bolt App from your iOS or Android device, then tap Pairing.
- Select SmallHD Monitor, then tap the Next button.
- Select SmallHD Monitor, then tap the Pair! button. The Bolt App will indicate when the pairing process is completed.
LENS DATA OVERLAY
Your Bolt 4K Monitor Module TX has two AUX ports that allow you to connect and communicate with a compatible Teradek RT controller and enables additional features such as Lens Data Overlay. This feature displays your controller’s lens map position on the monitor.
You will need the following:
- Lens Mapping License
- SmallHD/Teradek RT Interface Cable
- Connect a cable from the controller’s wired mode connector to one of the monitor’s AUX ports.
- Tap the screen on the monitor and navigate to ADD NEW TOOL>ADD ONS.
- Select TERADEK RT.
- The Lens Map Overlay will appear on the right and move according to controller’s knob movements.